Wilmington, DE: A Robot Snow Blower, Ready Before Winter
We installed a Yarbo Y40 robot snow blower for Chuck in Wilmington, Delaware: the RTK antenna up on the gable, a wireless bridge through the attic for the weak outdoor Wi-Fi, and the sidewalks mapped before the first storm.

Chuck, in Wilmington, Delaware, bought a Yarbo Y40 robot snow blower from us and had us do the whole job: deliver it, assemble it, install it and set it up. The goal was simple: no more shoveling the sidewalks. Now the robot clears the snow on its own, docks itself to recharge, and heads back out to finish the job.
At a glance
Location: Wilmington, Delaware
Machine: Yarbo Y40 Core + Snow Blower Gen 2
Also on the order: Yarbo snow plow blade, snow blower module cover, one year of Zippy Care
The tricky part: No strong Wi-Fi signal outdoors
What we did: Delivery and assembly, the RTK antenna on the gable, a wireless bridge through the attic, mapping and app setup
Timing: Ordered in September 2026, installed in the fall, ready before the first snow
The challenge
A robot snow blower needs two things a store box doesn't come with: a clear view of the sky for its RTK satellite positioning, and a dependable connection to the home network for mapping, scheduling and control from the app.
At Chuck's house the connection was the hard part. The Wi-Fi was fine inside, but outdoors the signal was too weak to rely on, and the Yarbo leans on it every time it's mapped, scheduled or checked on from the warm side of the window.
What we did
Built the machine. We delivered and assembled the Yarbo Y40 Core and the Snow Blower Gen 2 module, the two-stage blower with a 24-inch clearing width that Yarbo builds for heavy, wet snow.
Put the RTK antenna up high. We mounted it at the peak of the gable, where it has a clear view of the sky over the roof and the trees. The robot steers by it precisely enough to follow the edge of a sidewalk.
Fixed the outdoor Wi-Fi. With no strong signal outside, we ran a wireless bridge through the attic to carry the home's internet out to where the Yarbo works. That gives it a reliable connection for mapping, scheduling and app control. If your outdoor Wi-Fi is weak, this is the fix.
Mapped the sidewalks and set up the dock. We mapped the areas it clears, set up its dock, and tuned the clearing in the Yarbo app: a parallel route pattern, the auger's lowest height, the range of the chute's deflector and an 8-inch buffer from the edges.
Prepared it for the first storm. We prepped the snow blower module and walked Chuck through the winter routine (the tips are below). His order also included Yarbo's snow plow blade, a cover for the snow blower module and a year of Zippy Care.
The result
Chuck's Yarbo was assembled, installed and connected before snow season, without him building or configuring any of it. When it snows, it clears on its own, docks itself to recharge and heads back out. In his words below, that has been a luxury.
Because the Y40 Core takes other modules too, the same robot can later mow, blow leaves or trim if he adds them.
★★★★★ In their words
“It has been such a luxury to have my snowblower assembled and installed. Great job, Paul!!”
— Chuck R., Wilmington, DE · Review on zippylawnz.com
Photos from the job


Yarbo snow tips we left with Chuck
Remove or modify the auger guard to cut down on clogs in wet snow.
Coat the auger, impeller and chute with a non-stick silicone spray.
Clear in stages, every 2–3 inches, instead of waiting for a big pile-up.
Turn on auger antifreeze mode so it doesn't freeze between runs.
Don't cover the dock: a cover can block the GPS signal.
Always hit Emergency Stop before clearing a clogged chute.
Have a driveway like this?
Trace your driveway from satellite in about two minutes and see how a robot snow blower would handle it. It's free, and we go over the details with you before anything is ordered.
Rather talk it through? Book a free mapping call or call or text 844-445-2969.
The equipment on this job
Questions about this install
When should a robot snow blower be installed?
Before the snow. Mounting the antenna, sorting out the connection, powering the dock and mapping all go faster in fall weather, and it means the robot is ready for the first storm instead of the third.
What if my Wi-Fi doesn't reach outside?
That was the tricky part at Chuck's house. We ran a wireless bridge through the attic to carry the home's internet out to where the Yarbo works, so mapping, scheduling and app control stay reliable. We plan that before install day.
Can I put a cover over the robot's dock?
We advise against it. A cover over the dock can block the GPS signal the robot relies on.
Can the same Yarbo mow the lawn in summer?
Yes. The Yarbo Y40 Core carries swappable modules, so the robot that clears snow in winter can mow with the Lawn Mower Pro module in summer.
How robotic snow removal works →
More case studies
Eastern Shore, MD: 12 Acres and an Airstrip, All Robot-Mowed
Chester, MD: 3 Acres of Thick Turf, Mowed Around Parked Cars
