top of page

Navimow MowGate

Lets your robot mower pass through a fence between the front and back lawn on its own, so one mower covers every zone. Works with all Navimow mowers. $449.99 from Zippy Lawnz, an authorized Navimow dealer.

lp-mowgate-hero.jpg

★★★★★ What our customers say

“Paul at Zippy Lawnz advised me to go with two 430s to take care of my 2 acres of Bermuda lawn. His advice saved me money over the two 450s I was about to get. He's always there with great advice when I have a question. His service after the sale is awesome! I'd advise anyone to get their mower from Paul.” — Jeff Pierce, Navimow X430 owner

​

“You couldn't ask for a more polite, professional, knowledgeable guy. Always a pleasure to work with Paul, and I LOVE my Navimow.” — Kathleen P. Makowski, verified buyer

The Navimow MowGate guide

A MowGate is a battery-powered steel gate that sits in an opening at the bottom of your fence. The mower drives up, the gate checks for pets and unlocks, the mower passes through, and the gate locks again on its own. Your dogs stay in, your mower gets to mow both sides. We've installed them in wood, aluminum and wire fences, and around pools and paddocks.


Robotic lawn mower gate setup and installation: the Navimow MowGate


How the MowGate works

  • A magnet opens it. A sensor in the gate detects a magnet on the mower. The mower does a 360° scan for pets, the gate unlocks, the mower passes, and it re-locks.

  • Which mowers: the X4 (X430, X450) and Terranox have the magnet built in. The X3, i2 AWD, i2 LiDAR, i1 and H2 use the small magnet holder in the box. The H1 isn't supported.

  • Size: it needs a 37 by 22 inch opening. The frame is 36.6 by 21.3 inches, with a 33.5 by 17.7 inch passage. It weighs 29 pounds.

  • Power: four D batteries, good for up to about nine months. Rated IPX6.

  • Status light: green is healthy, yellow means the batteries are at 50% or below, red means swap all four. Plan on about one set a season.


A Navimow MowGate installed in a black aluminum picket fence
A MowGate in an aluminum picket fence.


Installing it: our dealer method

  1. Mark the opening with the cardboard template that comes in the box: 37 by 22 inches.

  2. Wood fence: build a 1×1 pressure-treated frame (one 40-inch cross beam, two 26 to 28-inch side posts), bury about 6 inches of each post, level the beam, screw the frame to the fence, then screw the gate to the frame. The frame gives you a square, level surface even when the fence isn't.

  3. Aluminum fence: cut the pickets at the template's top line, not at the top rail, and remove only the lower section of each one. The stubs become the bolt points for the gate's top frame, and the first full picket on each side takes the side brackets.

  4. Wire or mesh fence: we frame it in wood the same way.

  5. Map the channel in the app: map a zone on each side first, then go to Home > Settings > Map management > Edit map > Add more and tap the MowGate icon. Drive the mower to the gate straight and centered. When the app says "MowGate detected," tap Continue and give it two to three minutes to pass through.


A Navimow MowGate set in a welded wire fence with a pressure-treated wood frame
A wire fence, framed in wood so the gate sits square.

The Navimow app showing the MowGate detected prompt with a Continue button
"MowGate detected": tap Continue and let it drive through.

Our full step-by-step, with a free 10-page PDF, is How to install a Navimow MowGate.


📱 Plan the spot before install day: Before you cut the fence, stand at the opening and see the mower life-size through your phone's camera, take a picture, and share it with your spouse or text it to our installation team at 410-725-7500.



MowGates on real installs

West Chester, PA: an X430 that mows inside the pool fence

A Virginia farm: an X450 through gates and paddocks

A Navimow X430 at a MowGate in a pool fence in West Chester, PA
The West Chester pool fence: hands-off for a month and counting.

A Navimow mower passing through a MowGate in a wire farm fence
Through the gate on its own; the fence keeps doing its job.


Works with the MowGate



Keep reading



MowGate questions we hear most

Will the gate let my dog out?

It's built not to. The gate only unlocks for the mower's magnet, and the mower scans for pets before it opens. Then it locks itself again behind the mower.

How long do the batteries last?

Up to about nine months on four D batteries. Watch the light: yellow means half or less, red means replace all four. Most owners use about one set a season.

Do I need the magnet holder?

Not on an X4 or Terranox: the magnet is built in. Other supported Navimow models use the holder in the box, mounted underneath in a model-specific spot.



More Zippy Lawnz product guides


Robot mowers

Snow

Docking, power and gates

Blades, discs and cut quality

Antenna and signal



Why buy Navimow parts from Zippy Lawnz

We are an authorized Segway Navimow dealer and service center, not a warehouse. We install and repair these mowers ourselves, so we can tell you exactly what fits yours. Not sure? Call or text 410-725-7500 and a real person will answer. Every owner also gets free monthly live training.

More for your Navimow

More Zippy Lawnz best sellers

The mowers and parts our customers order most, each one sold, set up and supported by Zippy Lawnz.

Zippy Delmarva
elizabeth@zippylawnz.com
call or text 410-226-6705 

Zippy PA, NJ & DE
paul@zippylawnz.com
call or text 410-725-7500

Zippy Cape Charles, VA
zippy@zippylawnz.com
call or text 410-725-7500

Zippy West
wgolde@zippylawnz.com
call or text 720-251-1446

Zippy Steamboat
matthew@zippylawnz.com
call or text 610-585-6879

  • Reddit
  • Instagram
  • Facebook
  • Youtube
bottom of page